Whatsup with that rear fender?

What do you mean Art

I don't think he knows what an original K2 fender actually looks like since most K2's I see have the wrong K1 rear fender.

Unlike your bike that has the correct fender.

Ok that makes sense

1978 Honda Z50A
Original Parts
Frame
Front Wheel
Front Axle
Front Hubs and Brakes
Rear Wheel
Rear Axle
Rear Hubs and Brakes
Gas Tank
Fork Bridge
Fork Tubes
Fork Seals
Rear Fender
All Cross Frame Bolts – Engine, Swingarm, Shocks
All Steering Head Nuts/Bolts
Wire Harness (for lights only)
Brake Arm


Honda Parts From Other Bikes
1972 Z50 Tail light
1979 XR80 Swing Arm +4"
1991 CT70 Handlebars
2001 XR70 Handlebar Clamps
2003 Honda Monkey Front Fork Springs
2004 CRF70F 72cc 12v CDI Engine/Carb


Honda NOS Parts
Chrome Shock Nuts
Headlight Bucket
Headlight Nuts
Headlight Bolts
10mm Swing Arm Nut
CT70 Brake Rod
CT70 Rear Brake Rod Spring
Plastic Side Cover
Front Fender


Aftermarket Parts
Kijima Fork Legs +5cm
Head Tube Frame Decal
Monkey Logo Tank Badges
Kill Switch
Fuel Filter
320mm Rear Shocks
90 Degree Petcock
Elbow Air Filter
Headlight Unit
90 Watt Stator
12V Voltage Regulator
Front Brake Perch/Lever
Throttle Control Assy.
12V Tail light Bulb
12V Head light Bulb
Pro Circuit T4 Exhaust
Charlisle 4.80x8 Tires



Injuries During Project
10 Stitches on Left Index Finger
4 Busted Knuckles
4 Major Headaches
3 Minor Hangovers

The bike now has a 40.75" wheelbase. Stock is 35.25".

Cheers,
-Todd

My current work in Project for my 6 year old son:



It is stock in every way except the motor. The one that came in it was incorrect, and the one going in is a Lifan electric start 50 - he will be learning to ride on it, so that seemed like a good idea. It will get a Honda motor in it's next incarnation.

My stock, fairly-unmolested '97 - a future project:



I have no idea what I will be doing with it.


My next project after the Yellow one - 98 Jincheng Panda Funrider:



The Panda is Tagged for the street and is hopefully my winter project. Lots of goodies in mind, but too early to reveal anything.

I also have a couple of frames that may end up as something, depending on how many parts I have left over from the other ones

Greetings,
from a new member.

Here is a photo of the start my latest project - I am not sure if this model Honda is seen in western countries. The Shocks are replacing the original
shocks.

http://s365.photobucket.com/albums/oo94/kambada/MCP%20PROJECT/?action=view&current=YELLOW3.jpg

nice chally, a few of these made it over here to australia

Motodevo, Thanks for the info re Honda Charly's in Ozzie - I have a photo of one in Germany and one in Cambodia.

My N.o.s 76 Z50A, Getting the G'craft bug !