Finally, my 140cc lives!! - Page 5

chuckklr04 · 11-27-2008, 01:47 PM

Quote:

Originally Posted by dsrt4

This is what you need on the Bottom of the engine to put Oil into the head and from there on to go into the cooler.

Pic is from Tbolt the Link to the 140cc Iron bore is below the pic.

TBolt USA, LLC » Engines » Lifan 50-150 Engines » LIFAN 140cc

Here is how I Have my Cooler hooked up with the ELCHEAPO Cooler. This isnt my Bike..

Is that the best way to do it?

You would think that cooler oil going straight into the head would be better.

dsrt4 · 08:34 PM

Quote:

Originally Posted by chuckklr04

Is that the best way to do it?

You would think that cooler oil going straight into the head would be better.

The Problem is if you dont jump it like that or run a cooler to those bolts the head doesn't get oil.........

You can use the jumper and then go with a cooler going into the head.
Either way... You have to have something connecting those two oil passages at the bottom.

chuckklr04 · 12-08-2008, 12:20 AM

Well shit!

I put about 50 miles on it without the cooler or jump hose.

Did put one on this weekend.

Hopefully the head is fine.

Seems to me that it would come from the factory with a cooler or jump hose.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new lifan 140cc - first start....	reebo	Lifan	1	04-10-2008 05:05 PM
Got it running, finally!	Titshaw	General	4	11-20-2007 09:45 PM
Finally Started But Wide Open	vanmorton	Tech Area	3	10-09-2007 09:07 AM
Lifan 140cc Exhaust	clark4131	Lifan	3	09-13-2007 01:05 PM
It lives again !!!!!	mtkawboy	Tech Area	0	07-28-2006 04:45 PM